Plant Manager - Candidate RAM 2767917963

 

  • B.S, Business Management & A.S, Industrial Electronics Technology
  • 25+ years working in a manager capacity in beverage manufacturing
  • Promoted 2 times in one сorporation
  • He is knowledgeable, reserved, and a "straight shooter"

 

SUMMARY

Knowledgeable and experienced manufacturing leader recognized for transparency, honesty and open communication. Sets clear expectations and facilitates the team approach to problem solving. Consistently exceeds safety, quality, production and cost management goals. Committed, positive and action oriented.

 

COMPETENCIES

Respected leader Open minded Emotionally intelligent
Extensive industry knowledge Production planning Staff development
Proactive, continuous learner Quality assurance Manufacturing
Plant safety Union and non-union experience Cost management

 

EXPERIENCE

PLANT MANAGER 03/2015 - 04/30/2016

Earning $144K, plus 30% bonus. Plant closed. Received severance, left on good terms.

High speed, automated manufacturing facility producing over 600 SKUs and 16 – 19 MM specialty aluminum beverage (beer, soft drink, & energy drink) container ends daily. Facility employed 230 hourly employees and 23 salaried employees. Union plant operated 24 hours/day, 7 days/week. Plant closed, production was moved.

Responsible for daily operations including: safety, environmental, quality, production, labor, maintenance, finance & accounting and human resources. Ensured corporate initiatives and goals are communicated and related activities are implemented. Interface regularly with corporate production control and internal and external customers. Manager of 8 direct reports including: quality manager, engineering manager, administrative manager, production manager, maintenance manager, operating systems manager, HR manager, and EHS manager.

  • Negotiated union contract and plant closing agreement (effects bargaining).
  • Reported plant results to the VP of Manufacturing at Corporate on a daily, weekly, and monthly basis.
  • Oversaw plant closing including: managing production and inventory, issuing WARN notices, and developing a pre-shutdown and post-shutdown plan for de-commissioning the plant.

  

PRODUCTION MANAGER 11/2012 - 03/2015

High speed, automated manufacturing facility producing over 600 SKUs and 16 – 19 MM specialty aluminum beverage(beer, soft drink, & energy drink) container ends daily.

Responsible for plant safety, quality, production, labor costs, preventative/corrective maintenance, maintenance costs and spoilage. Insured timely communications between shifts and crew operations in all plant areas. Managed 9 direct reports including 8 supervisors, and a maintenance manager.

Evaluated products and machinery to ensure compliance with established quality and maintenance standards. Developed, revised and oversaw the implementation of all standard operating procedures (SOPs).

  • Developed an on the job (OJT) training program to enable hourly employees to be more proficient in their jobs which increased daily production.
  • Leader of process improvement teams to reduce spoilage, reduce cost and increase production.
  • Leader of the plant safety team to insure all safety issues were addressed.
  • Assessed success rate of new hires, implemented immediate changes to for key manufacturing positions to improve quality of applicant pool. New hires were able to achieve maximum productivity quickly and were provided opportunities for advancement and pay increases sooner.
  • Developed excellent working relationships employees plant-wide (union and non-union), facilitating a productive, positive work environment and a proactive approach to problem solving.

  

PRODUCTION MANAGER 10/2010 - 11/2012
  • Managed team of 8 supervisors with indirect responsibility of approximately 116 hourly employees producing 28mm aluminum beverage (beer & soft drink) container ends per day. Pro-employee plant operated 24 hours/day, 7 days/week.
  • Responsible for plant safety, quality, production, budgets, plant labor, maintenance and costs.
  • Designed and implemented a maintenance program which included all preventive maintenance and equipment overhaul maintenance. Program resulted in 98% production efficiency.
  • Developed and managed an on the job training (OJT) program for all plant hourly workers. Trained each employee on two different areas of plant production. Program built skills and expertise for employees and increased pool of cross trained personnel.

 

QUALITY ASSURANCE MANAGER 10/2009 – 10/2010 

Managed 2 assistant quality managers and a quality coordinator with indirect responsibility of approximately 116 hourly employees producing 28mm aluminum beverage (beer & soft drink) ends per day. A high speed, automated, manufacturing facility.

Ensured quality systems were in place, maintained and continuously upgraded the manufacturing process. Processes included: defective product holds, rework of defective product, quality gauging, specifications/tolerances and implementing and verification of compliance to quality policies and procedures.

  • Highly trained and actively involved with design of experiments, continuous process improvement teams (defect reduction), process control teams (statistical process control), and total productive manufacturing teams (cost, efficency, production, labor, and spoilage) teams.
  • Responsible for customer service throughout eastern United States.
  • Continuously improved a defect reaction guide to address all possible quality issues in each area of the manufacturing process including cut-off and hold procedures as well as proper rework procedures for each type of defect.
  • Managed audits from key customers such as Pepsi, Coke, and Anheuser Busch. Visited suppliers to audit their facilities to insure high levels of housekeeping and manufacturing practices were attained and maintained.

 

OTHER RELEVANT EXPERIENCE 10/12/1982 – 10/01/2009

QUALITY ASSURANCE MANAGER  

Same responsibilities as listed above.

  

ENGINEERING SUPERVISOR  

A direct report to the plant manager. A salaried employee with two direct reports. Responsible for all plant maintenance, all plant capital projects (including compiling/documenting each project, justfying each project, gaining corporate approval, and managing each project through to completion). Responsible for all Environmental compliance, documentation and reporting.

 

PRODUCTION SUPERVISOR  

Direct report to the Production Manager. Supervised 30 hourly employees on a production team. Responsible for all safety, quality, production, spoilage, environmental and labor related issues involving the production team.

 

MAINTENANCE MANAGER  

Direct report to the Engineering Manager. A salaried employee with two direct reports, responsible for all plant maintenance (mechanical and electrical), preventive maintenance, and breakdown / overhaul maintenance of all production and support equipment. Equipment examples include: 125 & 200 ton Minster stamping presses, 90 ton Bruderer stamping presses, rotary liners, conveying equipment, automated bagging equipment, air compressors, vacuum pumps, chiller units, cooling towers, water circulating pumps, ect. Responsible for all Environmental compliance, documentation and reporting.

 

NEW PLANT STARTUP ASSISTANCE  

Assisted the MCC management group with a new end manufacturing plant startup in Oklahoma City, OK for approximately 9 months. Responsible for various electrical projects and mechanical assistance.

 

TEAM LEADER  

Hourly employee responsible for managing a production team of aproximately 30 hourly employees. Managed safety, quality, production, labor issues, ect. Direct report to the team Supervisor.

 

HOURLY TEAM MEMBER  

Electrical / electronic technician assigned to a production team of approximately 30 hourly employees. Responsible for all electrical and electronic issues within the manufacturing facility including all electrical power coming into and within the plant, all electrical issues associated with production equipment and plant support equipment.

 

ADDITIONAL COMPETENCIES

  • Type 60 words per minute
  • Extensive computer experience including machine PLC’s, desk top and laptop computers, MS Word, Excel, and PowerPoint, SAP, JD Edwards, and multiple speciality software programs.
  • Technical
  • Honest
  • Assist employees in their development for future advancement

 

EDUCATION

  • Nova Southeastern University, Fort Lauderdale, FL
    Bachelor of Science Degree, Business Management
  • Santa Fe Community College, Gainesville, FL
    Associate of Science Degree, Industrial Electronics Technology
  • United States Air Force - Military Training, Keesler AFB, Mississippi
    Major: Electronic Computer Systems Repairman

 

MILITARY SERVICE

United States Air Force - Electronic Computer Systems Repairman
Honorable discharge - rank of Sergeant
Top Secret / Crypto security clearance with extensive background investigation

 

Honors and awards included:

  • Missile Master Technician Award
  • Certificate of Merit
  • Outstanding Airman, Whiteman Air Force Base

Whats new

  • When is it Time to Hire a Recruiter for your Small Business?
    Written by
    When is it Time to Hire a Recruiter for your Small Business? Stay focused on what you do best. Do you really want the cost and responsibility of an inhouse employee? What business are you in? Let our experience and deep resources ensure that you procure that Best in Class candidate. When you need help - we have who you need! This costs money. We pay for access to multiple databases, software licenses, salaries and benefits for researchers.  Hiring us to fill your important roles is smart. We have the resources and depth of expertise to recognize talent when we see it. Yes,…
    Written on Wednesday, 15 January 2020 01:39 in Hiring Solutions Read 6818 times